How to Build a Rocket?

Rockets have been around for hundreds of yearsLaunch pad
serving various purposes. They can be used forEngine mount
weaponry, fireworks, ejection seats, launchingPaper
vehicles like spacecrafts for artificial satellites,Sand paper
human space flight and exploration. The earliestCotton bud
design of rocket was created in China and IndiaPaint
for displaying fireworks. The word 'rocket' isParachute
commonly used to refer to three different typesRequired Tools:
of objects:Engine
1. A flying vehicle used by astronauts to fly intoSmall paintbrush
space for discovery purposes.Ignition system
2. A weapon that is fired from tanks toward anPencil
aircraft.Craft knife
3. A replica of any of the above two objects thatInstructions:
is used to practice or comprehend air launching or1. Use the pencil to trace the plan on a piece of
to propel fireworks into the air.paper. It must have a cylindrical body, nose cone,
The only difference between the rocket used tothree fins, and an engine.
propel spacecraft into space and the kind that is2. Affix the nose cone to the cylindrical body and
used as weapon is how they are built. Spacecraftaffix the parachute to the rear of the nose cone
are constructed with a sturdy, short thrust thatwith plastic cement.
will get them into space since this is their primary3. To make the fins, draw the design with a pencil
goal. The rocket missile need to be kept in goodon paper then cut out the object from the
condition to ensure that staying power is kept atbalsawood with the craft knife. Use sand paper to
the required paradigm. Regardless of the kind ofsand the fins to make them smooth.
rocket, they all use a similar chemical reaction to4. Use rubber cement to firmly attach the fins to
shoot the object into the air. The chemical usedthe soda bottle or your choice of cylindrical
to set off rockets may be gasoline, liquid oxygenobject.
or liquid hydrogen.5. Connect the engine mount to the object. It
Making a rocket can be enjoyable especially if youmust be positioned into the bottom of the rocket
are working with children or if you just want tounderneath the fins. In order to set up
do something innovative. You have two choicesappropriately, take a cotton bud and smear glue
to select from - either making one from scratchto the outside of the engine mount. Slide it below
or purchasing a kit to fit together. Yourthe fins in the bottom of the rocket. The glue
homemade rocket may not fly as high as oneshould hold it into place.
that you can buy but it is cheaper and the6. Paint your rocket with several light coats for a
project is fun. It is important when building amore attractive look. So long as the paint is
rocket from scratch to trace a simple plan aheadcompletely dried, you can shoot your rocket.
of time. The instructions below will help you toTips:
create one from scratch.It is crucial to smooth the fins as air travels easily
Required Materials:over smooth fins than rough ones.
Plastic Cylinder object (soda bottle is an excellentWhen firing your rocket, make sure you do so in
selection)open spaces away from persons, animals, vehicle
Nose coneand power lines. This will decrease the hazard of
Finsinjury or damage.
BalsawoodYou can try working with more fins or different
Wood gluestyles as the fins are very essential in determining
Plastic cementthe way a rocket discharges through the sky.