| Minimotos are fast becoming very popular for | | | | screw 2 long M6 threaded bolts into these 2 holes |
| leisure riding and also for competitive racing use. | | | | and turn evenly in a clockwise direction to prise |
| There has been a marked move towards | | | | off the flywheel.Method 2 - Use a purpose made |
| improving the performance and power | | | | flywheel puller.4) On removal of the flywheel, the |
| characteristics of these miniature racing machines. | | | | stock key can now be observed resting in its |
| One such easy way to enhance the performance | | | | machined slot in the crankshaft end. Using a small |
| of your minimoto is to fit a rocket key. The | | | | pick simply prise the stock key from its slot.5) |
| minimoto rocket key is designed with a 10 degree | | | | Install the new minimoto rocket key in the |
| offset and is a direct replacement for the | | | | vacated slot. Note that the 10 degree offset of |
| standard straight cut item. Here are the easy to | | | | the new rocket key should point to the right |
| follow instructions for rocket key fitment:Fitting a | | | | (towards the front of the machine).6) Once the |
| minimoto rocket key1) Firstly remove the pull | | | | rocket key has been fitted in its slot, refit the |
| start unit from the right side of the minimoto | | | | flywheel and secure with its retaining bolt. It is a |
| engine, which is held in place by 3 hexagonal head | | | | good idea at this stage to use some thread |
| screws and 1 bolt attachment to the cylinder | | | | locking compound on the retaining bolt. Refit the |
| head area.2) On removing the pull start unit the | | | | pull start unit and secure.Now experience and |
| flywheel will be exposed. The flywheel is retained | | | | enjoy the power gains from your newly fitted |
| with a 8mm bolt in the centre. Remove the 8mm | | | | minimoto rocket key.Minimotos4u is a family run |
| bolt with a socket and wrench. In order to stop | | | | business based in North Lincolnshire. With over 3 |
| the flywheel rotating whilst undoing the bolt | | | | years experience of supplying customers with top |
| wedge an Allen key in between one of the | | | | quality certified minimotos from the most |
| flywheel fins and lodge it against the footrest | | | | reputable suppliers. We carry extensive stocks of |
| support bar.3) Once the retaing bolt has been | | | | minimoto spares, performance parts, minimoto |
| removed, the flywheel can be extracted. There | | | | decals and much more. Specialising in race tuned |
| are 2 available methods of extraction.Method 1 - | | | | minimotos in MotoGP livery, we also stock dirt |
| There are two threaded holes in the flywheel, | | | | bikes and can cater for all your minimoto needs. |